KO Inquiry

HOMETechnology

Core Technology

Technology

Technology for indoor air — from detection and filtration to data management.

How It Works

Five steps at the moment of entry

In the few seconds a person steps through the entrance, detection, air shower, dust capture, filtration and deodorization run in one airflow. Each function is a separate module for easy inspection and replacement.

  1. 01Detect

    Entry detection

    When LiDAR and motion sensors detect entry, the air shower starts automatically.

  2. 02Air Shot

    Cyclone air shot

    Rotating airflow from three-tier nozzles removes fine dust from clothing and belongings. Air is not blown directly at the face.

  3. 03Capture

    Upper & lower dust capture

    Upper and lower collector fans draw in the removed particles before they spread.

  4. 04Filter

    Multi-stage filter · sterilization

    Treated by CD, H13 HEPA and carbon-nanotube filters plus LED sterilization.

  5. 05Refresh

    Natural phytoncide

    Hinoki phytoncide cartridges deodorize and inhibit bacteria.

Low Energy

Three functions in one,
with a light power bill

Air shower, purification and sterilization combined in one unit, designed to ramp up only when needed.

Integrated low-power designThree functions in one unit
Air shower only on detectionHigh output only when someone enters
Scheduled operationStandby power cut by day and hour

Est. monthly power cost

approx.5,000KRW

About KRW 170 a day

Estimate based on continuous operation; varies by model, operating hours and electricity rates.

Exploded view of the filter module
FILTER MODULE

Filter Module

A five-layer
filter module

  1. 01

    CD dust filter

    Captures large dust and pollutants first to protect downstream filters.

  2. 02

    LED sterilization

    Eco-friendly LEDs ahead of the filters sterilize the air passing through.

  3. 03

    H13 HEPA filter

    An EN 1822 H13-grade filter captures ultrafine dust.

  4. 04

    Carbon-nanotube filter

    Adsorbs harmful gases and odors.

  5. 05

    Collector fan

    Draws contaminated air in from above and below and sends it to the filters.

Sensing

Reading the air
in numbers

Built-in sensors continuously measure indoor air quality and entries. Readings appear in real time on the device screen and the management platform and are stored as history.

  • 6 air-quality metricsPM2.5 · PM10 · CO₂ · VOC · temperature · humidity
  • Entry detectionLiDAR · motion sensor
  • Temperature screeningThermal camera (option)
LIVE AIR1F Entrance · Sample screen
PM2.5Ultrafine dust12㎍/㎥Good
PM10Fine dust24㎍/㎥Good
CO₂Carbon dioxide612ppmGood
VOCVolatile organic compounds0.21mg/㎥Moderate
TEMPTemperature23.4℃—
HUMIHumidity45%—

Live readings · updated every minute

AIoT Platform

What happens after installation
matters more

Every unit measures indoor air quality and sends it to the cloud. Whether one site or hundreds nationwide, check and control everything from one screen.

01Real-time monitoringAir quality and device status by site
02Remote controlOperating modes · schedules by day and hour
03Care integrationFilter replacement timing · fault alerts
04ReportsPeriodic reports · ESG data
ARCADIA Platform ↗
arcadia.ai.kr · OverviewARCADIA overview — carbon capture, filter status, nationwide installations
arcadia.ai.kr · TodayARCADIA dashboard — device status, indoor air, care and filter management

Live ARCADIA platform screens